majorwiki/05-troubleshooting/networking/ssh-socket-tailscale-race-condition.md

Tailscale Boot Race Conditions (SSH Unreachable After Reboot)

Two related race conditions can make a host unreachable via Tailscale after reboot. Both stem from systemd services starting before Tailscale or the network is ready.

---

Race 1: ssh.socket Binds Before Tailscale Is Up (Ubuntu)

Symptom

SSH to a host via Tailscale IP times out. tailscale ping works, tailscale status shows active; direct, but SSH on port 22 refuses connections. No access via Hetzner console if root password is unset.

Cause

Ubuntu 24.04 uses systemd socket activation for SSH (ssh.socket instead of persistent ssh.service). When the socket override binds to a Tailscale IP, it can start before tailscaled.service is ready. The bind may succeed initially (Tailscale state file caches the IP), but a later Tailscale reconnect or interface reset invalidates the bound address silently — SSH dies with no recovery path.

Diagnosis

# From another host:
tailscale ping <IP>          # succeeds — host is up
ssh root@<IP>                # times out — sshd not listening

# After gaining console access or reboot:
systemctl status ssh.socket  # check Listen: address
journalctl -b -1 -u ssh     # likely empty — sshd never spawned
journalctl -b -1 -u ssh.socket  # socket started before tailscaled

Fix (current — 2026-05-31)

After=tailscaled.service orders against the service becoming active — not against the tailscale0 interface actually having an IPv4 address. tailscaled flips to active within a second of starting, but the kernel doesn't have the address bound to the interface until DERP relays connect and the control plane confirms the node. ssh.socket attempting ListenStream=<TS IP>:22 in that window fails with Cannot assign requested address, the socket goes into a failed state, and there is no automatic retry.

The proper gate is a dedicated readiness service that waits for the tailscale0 IPv4 address to exist before letting ssh.socket bind:

# /etc/systemd/system/tailscale-wait-ready.service
[Unit]
Description=Wait until tailscale0 has an IPv4 address
After=tailscaled.service
Requires=tailscaled.service
ConditionPathExists=/usr/sbin/ip

[Service]
Type=oneshot
RemainAfterExit=yes
TimeoutStartSec=120
ExecStart=/usr/bin/bash -c 'for i in $(seq 1 120); do ip -4 -o addr show tailscale0 2>/dev/null | grep -q "inet " && exit 0; sleep 1; done; exit 1'

[Install]
WantedBy=multi-user.target

# /etc/systemd/system/ssh.socket.d/override.conf
[Unit]
After=tailscale-wait-ready.service
Requires=tailscale-wait-ready.service

[Socket]
ListenStream=
ListenStream=<TAILSCALE_IP>:22

Reload + restart:

systemctl daemon-reload
systemctl enable tailscale-wait-ready.service
systemctl restart ssh.socket
ss -tlnp | grep :22   # verify bound to Tailscale IP

!!! note "Evolution of this fix" - 2026-05-19 v1 — After=tailscaled.service + BindsTo=tailscaled.service. Worked initially but caused a shutdown-time ordering cycle. - 2026-05-23 v2 — BindsTo swapped for Requires to break the cycle. Fixed the cycle but did not wait for tailscale0 to actually have an IP — just for tailscaled to be active. Hosts continued losing SSH after some reboots (intermittent, depending on whether the race won). - 2026-05-31 v3 — Added tailscale-wait-ready.service to gate ssh.socket on the interface having an address. This is the current canonical fix.

!!! warning "Do NOT use BindsTo" BindsTo=tailscaled.service creates a systemd ordering cycle during shutdown: basic.target → sockets.target → ssh.socket → tailscaled.service → basic.target. Systemd breaks the cycle by deleting jobs unpredictably, which can prevent ssh.socket from starting on the next boot. Use Requires= for startup ordering without the bidirectional lifecycle coupling.

Affected Hosts

Ubuntu hosts using configure_tailscale_ssh_only.yml: majorlinux, dcaprod-hetzner, tttpod-hetzner, majortoot-hetzner. Fedora hosts (majordiscord) use firewall rules for SSH restriction — not affected by this race.

---

Race 2: tailscaled Starts Before Network Is Online (All Hosts)

Symptom

Host reboots but never appears on Tailscale. tailscale ping times out entirely. SSH is dead because Tailscale never connects. The host is up (accessible via provider console) but isolated from the Tailscale network.

Cause

tailscaled.service ships with After=network-pre.target, which fires before the network interface has an IP. On VPS hosts (especially Hetzner), the interface can take several seconds to come online. Tailscale starts, sees no network (SetNetworkUp(false), link state: defaultRoute= ifs={} v4=false v6=false), fails DNS bootstrap and DERP relay connections, and gets stuck — never retrying.

Diagnosis

# From Hetzner console or another access method:
journalctl -b -u tailscaled | grep -E "SetNetworkUp|link state|error|DERP"
# Look for:
#   magicsock: SetNetworkUp(false)
#   link state: interfaces.State{defaultRoute= ifs={} v4=false v6=false}
#   health: Tailscale could not connect to any relay server

Fix

Deploy a systemd drop-in to wait for full network connectivity:

# /etc/systemd/system/tailscaled.service.d/override.conf
[Unit]
After=network-online.target
Wants=network-online.target

Then reload and restart:

systemctl daemon-reload
systemctl restart tailscaled

Affected Hosts

All hosts where Tailscale is the primary access path. Particularly impactful on VPS hosts with slow interface bringup. Both Fedora and Ubuntu hosts are affected.

---

Prevention

• Set root passwords on all VPS hosts for emergency console access
• Ansible playbooks deploy both fixes automatically:
  • configure_tailscale_network_wait.yml — tailscaled network-online dependency (all hosts)
  • configure_tailscale_ssh_only.yml — ssh.socket Tailscale dependency (Ubuntu only)

References

• dcaprod#2026-05-19 — SSH unreachable due to ssh.socket race condition with Tailscale
• majordiscord#2026-05-19 — Tailscale boot race: unreachable after Ansible reboot
• majorlinux#2026-05-19 — ssh.socket override patched: added Tailscale dependency
• dcaprod#2026-05-23 — SSH unreachable again: BindsTo ordering cycle in ssh.socket override
• majortoot#2026-05-31 — ssh.socket race post-reboot on majortoot-hetzner (during cutover night)
• Ansible: configure_tailscale_ssh_only.yml, configure_tailscale_network_wait.yml